Resetter Epson L130 L220 L310 L360 L365 + How to Reset

  • Posted by:
  • Posted on:
  • Category:
  • System:
  • License:
  • Developer:
  • File Name:
  • Download(s):
banner 468x60

Download Resetter Epson L130 L220 L310 L360 L365 + How to Reset 2021

In general, Epson printers, be it the L365, L360, L310, L220, L130 or other series, usually when there is an error or problem, the ink / paper indicator light will flash alternately / simultaneously, causing the printer to be unable to use or not to perform print. Some of the causes that cause the indicator light to blink, it could be caused by the ink in the tube has run out, the cartridge is dirty / not tight / damaged, paper jam (there is paper / dirt in the roller}, the paper print has reached the maximum limit (over print). ), the ink pad is full and several other causes.

banner 300x250

In addition, on the computer screen (Laptop / PC) a dialog box will also appear containing a warning message. For example “it is time to reset the ink levels”, “it is nearly time to reset the ink levels”, “Ink waste is full”, “service required”, “Ink pad is at the end of its service live” or message similar errors. Examples like the following image.

1. Initial Check for Epson Printer Error Causes

when you find the Epson printer cannot print, which is marked by a blinking indicator light or there are various error messages as above, you should do an initial check first of the parts that might be the main cause Among them:

  • Check the ink in the printer tube, if it runs out please refill it.
  • Check the printer cartridges. Make sure there is no dirt sticking or blocking and see its position, whether it is installed properly or not.
  • Make sure there is no paper jam in the printer roller.
  • See the cable that connects the printer to the computer. Make sure it is installed properly.

However, if you have done the things above, but the printer is still not working, you should do a Total Reset. The goal is to reset all data stored by the printer’s Counter IC (EEPROM). For example, resetting the maximum number of printed paper to zero (like new), normalizing the ink pad counter, restoring the printer’s initial settings and so on. To do a Reset, there are two ways that can be done. First Manual Reset Without Application and second Automatic Reset Using Resetter Software Epson Adjustment Program. These two methods work well on several types of Epson L-Series printers, including the L130, L220, L310, L360 and L365.

2. How to Manually Reset Epson L130 L220 L310 L360 L365

One of the easiest, most practical and quick steps to reset the Epson L130/L220/L310/L360/L365 is to reset it manually without any software. How to do it? here are the steps.

Unplug the power cable for about 3-5 minutes. Turn it back on and wait for the printer to turn on perfectly. Next, press and hold the resume button (ink logo) for 5 seconds, then release. Press and hold the resume button again for 3 seconds, then release it. Shortly after that, the printer will automatically reset and wait for it to finish. If successful, the indicator light will no longer flash and is ready to use.

3. Auto Reset Epson L130 L220 L310 L360 L365

As mentioned above, to perform an Automatic Reset, a special software is required, namely the Resetter Adjustment Program or AdjProg. This application is a tool to help solve various problems that are often faced by Epson printers. The Epson Resetter has many functions, which in addition to being able to reset all data stored by the Counter IC printer, such as resetting the maximum number of documents that have been printed, resetting the waste ink pad counter and so on can also be used for maintenance purposes. For example head cleaning, setting EEPROM and so on.



( 1563 Votes )
Please Rate!
Resetter Epson L130 L220 L310 L360 L365 + How to Reset

No votes so far! Be the first to rate this post.

Note: This apps or files "Resetter Epson L130 L220 L310 L360 L365 + How to Reset" is for educational purpose only and should not be used for illegal purposes.

Disclaimer: This file (Resetter Epson L130 L220 L310 L360 L365 + How to Reset) is completely free to use and distribute. All uploaded files and copyrights are properties of their respective owners. Read our DCMA and Privacy Policy.

Report Copyright Infringement
banner 728x90

Leave a Reply

Your email address will not be published. Required fields are marked *